Skip to content

Data Attributes

b3_azimut

Azimuth of roofpart. Available for the LoD 2.2 roofparts in GPKG 2D layers.

Data type: real number

Unit: degrees

b3_bag_bag_overlap

The total overlap area of BAG polygon with other BAG polygons. Unit: square metre.

Data type: real number

Unit: square metre

b3_bouwlagen

An estimation of the number of floors in the building. Estimates are only are available for buildings with up to 5 estimated floors.

Data type: nominal number

Unit: -

b3_dak_type

Roof type of the building.

Data type: categorical

Unit: -

Values:

Values Description
slanted Roof with at least one slanted surface.
multiple horizontal Roof with multiple, only horizontal surfaces.
single horizontal Roof with a single horizontal surface.
no points No point was found for the building.
could not detect Could not detect a roof surface, even though points were found.

b3_dd_id

Dak Deel ID. Roofpart ID.

Data type: nominal number

Unit: -

b3_h_dak_50p

Median elevation on roof surface based on reconstructed 3D model in LoD2.2. Given as elevation above sea level (NAP).

Data type: real number

Unit: metre

b3_h_dak_70p

The 70th percentile elevation on roof surface based on reconstructed 3D model in LoD2.2. Given as elevation above sea level (NAP).

Data type: real number

Unit: metre

b3_h_dak_max

Maximum elevation on roof surface based on reconstructed 3D model in LoD2.2. Given as elevation above sea level (NAP). Unit: metre.

Data type: real number

Unit: metre

b3_h_dak_min

Minimum elevation on roof surface based on reconstructed 3D model in LoD2.2. Given as elevation above sea level (NAP).

Data type: real number

Unit: metre

b3_h_maaiveld

Elevation above sea level (Amsterdam Ordnance Datum) at the ground level of the building. Calculated as the 5th percentile of the ground points found within a 4 meter radius of the building.

Data type: real number

Unit: metre

b3_hellingshoek

Slope of roofpart. Available for the LoD 2.2 roofparts in GPKG 2D layers.

Data type: real number

Unit: degrees

b3_kas_warenhuis

The building is greenhouse or warehouse (according to TOP10NL) or has an area of over 70000 square meters.

Data type: categorical

Unit: true/false

b3_kwaliteitsindicator

Indication of the reliability of the building reconstruction. Value false indicates that the reconstruction is possibly incorrect. b3_kwaliteitsindicator = (b3_bag_bag_overlap == 0) AND (b3_val3dity_lod22 == []) AND ( (b3_pw_selectie_reden != _HIGHEST_YET_INSUFFICIENT_COVERAGE) AND (b3_pw_selectie_reden != _LATEST_BUT_OUTDATED) )

Data type: categorical

Unit: true/false

b3_mutatie_ahn3_ahn4

true if there was a significant change detected in the building between the AHN3 and AHN4 pointclouds.

Data type: categorical

Unit: true/false

b3_nodata_fractie_ahn3

Fraction of the footprint area that has no point data in the AHN3 point cloud. Only points classified as building or ground are considered.

Data type: real number

Unit: -

b3_nodata_fractie_ahn4

Fraction of the footprint area that has no point data in the AHN4 point cloud. Only points classified as building or ground are considered.

Data type: real number

Unit: -

b3_nodata_radius_ahn3

Radius of the largest circle inside the BAG polygon without any AHN3 points. Only points classified as building or ground are considered.

Data type: real number

Unit: metre

b3_nodata_radius_ahn4

Radius of the largest circle inside the BAG polygon without any AHN4 points. Only points classified as building or ground are considered.

Data type: real number

Unit: metre

b3_opp_buitenmuur

Total area of the exterior walls. Unit: square metre.

Data type: real number

Unit: square metre

b3_opp_dak_plat

Total area of the flat parts of the roof. Unit: square metre.

Data type: real number

Unit: square metre

b3_opp_dak_schuin

Total area of the sloped parts of the roof. Unit: square metre.

Data type: real number

Unit: square metre

b3_opp_grond

Total ground floor area. Unit: square metre.

Data type: real number

Unit: square metre

b3_opp_scheidingsmuur

Total area of the party walls. Unit: square metre.

Data type: real number

Unit: square metre

b3_pand_deel_id

Buildingpart ID. A building can have multiple parts when it was cut into parts because of underground parts.

Data type: nominal number

Unit: -

b3_puntdichtheid_ahn3

Density of the AHN3 point cloud on BAG polygon. Only points classified as building or ground are considered.

Data type: nominal number

Unit: points per square metre

b3_puntdichtheid_ahn4

Density of the AHN4 point cloud on BAG polygon. Only points classified as building or ground are considered. Unit: points per square metre.

Data type: nominal number

Unit: points per square metre

b3_pw_bron

Source of the point cloud, eg. AHN3 or AHN4.

Data type: text

Unit: -

b3_pw_datum

Acquisition year of the point cloud. This is determined by looking at the GPS timestamps on the AHN points for the building. In case good GPS timestamps are not available the file creation date of the point cloud file is used.

Data type: date

Unit: YYYY

b3_pw_selectie_reden

Provides information about the pointcloud selection indicated in the pw_bron attribute.

Data type: categorical

Unit: -

Values:

Values Description
PREFERRED_AND_LATEST The selected point cloud has a good point coverage and there are no newer point clouds available that also have good point coverage.
PREFERRED_NOT_LATEST The selected point cloud has a good point coverage and there is a newer point cloud available that also has good coverage. Newer pointcloud was not selected because no mutation was detected.
LATEST_WITH_MUTATION The selected point cloud has a good point coverage and a mutation was detected compared to the older pointclouds.
_HIGHEST_YET_INSUFFICIENT_COVERAGE The selected point cloud has possible poor point coverage. Nonetheless, it is the point cloud with the highest point coverage among all available point clouds.
_LATEST_BUT_OUTDATED The selected pointcloud is the latest one available, but it may be outdated for this building. This happens when the year of construction is equal or later than the point cloud acquisition date.

b3_reconstructie_onvolledig

Indicates whether full LoD1.2/LoD1.3/LoD2.2 reconstruction was skipped for this feature.

Data type: None

Unit: None

b3_rmse_lod12

Root Mean Square Error of the 3D distances between the point cloud and the LoD1.2 model. Unit: metre.

Data type: real number

Unit: metre

b3_rmse_lod13

Root Mean Square Error of the 3D distances between the point cloud and the LoD1.3 model. Unit: metre.

Data type: real number

Unit: metre

b3_rmse_lod22

Root Mean Square Error of the 3D distances between the point cloud and the LoD2.2 model. Unit: metre.

Data type: real number

Unit: metre

b3_val3dity_lod12

Val3dity error codes for the LoD1.2 3D model. Empty list means valid geometry.

Data type: list

Unit: -

b3_val3dity_lod13

Val3dity error codes for the LoD1.3 3D model. Empty list means valid geometry.

Data type: list

Unit: -

b3_val3dity_lod22

Val3dity error codes for the LoD2.2 3D model. Empty list means valid geometry.

Data type: list

Unit: -

b3_volume_lod12

Volume of the LoD1.2 model. Unit: cubic metre.

Data type: real number

Unit: cubic metre

b3_volume_lod13

Volume of the LoD1.3 model. Unit: cubic metre.

Data type: real number

Unit: cubic metre

b3_volume_lod22

Volume of the LoD2.2 model. Unit: cubic metre.

Data type: real number

Unit: cubic metre

begingeldigheid

Relates to the building registration history and version.

Data type: date

Unit: YYYY-MM-DD

Source: BAG. See BAG Catalogus

documentdatum

Building registration date.

Data type: date

Unit: YYYY-MM-DD

Source: BAG. See BAG Catalogus

documentnummer

Document number.

Data type: text

Unit: YYYY-MM-DD

Source: BAG. See BAG Catalogus

eindgeldigheid

Relates to the building registration history and version.

Data type: date

Unit: YYYY-MM-DD

Source: BAG. See BAG Catalogus

eindregistratie

Relates to the building registration history and version.

Data type: date-time

Unit: YYYY-MM-DDThh:mm:ss.sss

Source: BAG. Zie BAG Catalogus

geconstateerd

Indicates that the buildings has included in the BAG registration.

Data type: categorical

Unit: true/false

Source: BAG. See BAG Catalogus

identificatie

ID of a building.

Data type: text

Unit: -

Source: BAG. See BAG Catalogus

labels

Building surface semantics. Only available in the GPKG 3D layers. This is an array of integers, where an integer refers to a surface type (0: GroundSurface, 1: RoofSurface, 2: OuterWallSurface, 3: InnerWallSurface). If a surface does not have a semantic value, NULL is used instead. Thus the length of the array equals the number of 3D polygons in the geometry, and the order of values in the array corresponds to the order of polygons.

Data type: list

Unit: -

oorspronkelijkbouwjaar

Building construction year.

Data type: date

Unit: YYYY

status

The current fase in the buildings life-cycle.

Data type: categorical

Unit: -

Source: BAG. See BAG Catalogus

tijdstipeindregistratielv

Relates to the building registration history and version.

Data type: date-time

Unit: YYYY-MM-DDThh:mm:ss.sss

Source: BAG. See BAG Catalogus

tijdstipinactief

Relates to the building registration history and version.

Data type: date-time

Unit: YYYY-MM-DDThh:mm:ss.sss

Source: BAG. See BAG Catalogus

tijdstipinactieflv

Relates to the building registration history and version.

Data type: date-time

Unit: YYYY-MM-DDThh:mm:ss.sss

Source: BAG. See BAG Catalogus

tijdstipnietbaglv

Relates to the building registration history and version.

Data type: date-time

Unit: YYYY-MM-DDThh:mm:ss.sss

Source: BAG. See BAG Catalogus

tijdstipregistratie

Relates to the building registration history and version.

Data type: date-time

Unit: YYYY-MM-DDThh:mm:ss.sss

Source: BAG. Zie BAG Catalogus

tijdstipregistratielv

Relates to the building registration history and version.

Data type: date-time

Unit: YYYY-MM-DDThh:mm:ss.sss

Source: BAG. See BAG Catalogus

voorkomenidentificatie

Relates to the building registration history and version.

Data type: ordinal number

Unit: -

Source: BAG. See BAG Catalogus